抑制型电导-离子色谱法测定水中无机阴离子

采用抑制型电导-离子色谱法测定生活饮用水、污水和地表水中F-、Cl-、NO2-、Br-、NO3-、PO43-、SO42-等7种无机阴离子,对清洁水样过滤后直接测定,浑浊样品离心后取上清液过滤测定。F-在0.100 mg/L~1.20 mg/L范围内、其余6种阴离子在1.00 mg/L~12.0 mg/L范围内线性良好,方法检出限为0.031 mg/L~0.47 mg/L,水样平行测定的RSD为0.9%~1.8%,加标回收率为82.6%~110%。     

Characteristic, composition, and sources of TSP investigated by HRTEM/EDS and ESEM/EDS

Total suspended particle (TSP) collected at the fifth floor of House Dust in Hunan University, China, was analyzed in terms of microscopic morphology and chemical composition. The fine particles (50?nm-2?μm) in the TSP were analyzed by a high-resolution transmission electron microscope equipped with an energy-dispersive X-ray analyzer (HRTEM/EDS). Results showed that the particles were in shapes of plate, irregular and agglomerate. Based on EDS results, these fine particulate matter was primarily composed of Fe-rich (35.82-61.29%), Ca-rich (30.18-36.77%) and Si-rich (18.95-32.28%) particles. Other elements mainly including Mg (0.47-4.97%), Al (0.45-14.57%), S (0.45-4.73%), K (1.13-2.13%) and Zn (0.67-3.85%) were also observed. The sources analysis indicated that the HRTEM particles mainly originated from coal combustion, traffic emission, vehicles exhaust emission and fugitive soil or cement particulate matter. The coarse particles (4-50?μm) were detected by environmental scanning electron microscopy coupled with energy-dispersive X-ray detector (ESEM/EDS). Based on a simple algorithm, ESEM particles were categorized into five groups: C-bearing (46.15%, 67% and 86.98%), Si + Ca-bearing (21.48?+?11.80%, 16.51?+?10.81% and 16.32?+?10.62%), Si + Al-bearing (20.06?+?12.40%, 20.16?+?11.22% and 15.31?+?11.25%), Si-bearing (34.40%, 26.92% and 27.15%) particles and aggregates, most of which exhibit obvious crystalline structure, and these ESEM particles mainly derived from vehicles exhaust emission, coal combustion, soil, and biomass burning, while the aggregates are indicative of atmospheric reaction progress. HRTEM/EDS and ESEM/EDS are mutual complementary in analyzing the characteristic and determining the sources of TSP.     

Development of a multi-criteria index ranking system for urban runoff best management practices (BMPs) selection

Low impact development best management practices (LID-BMPs) are considered to be cost-effective measures for mitigating the water quantity and quality impact of urban runoff. Currently, there are many types of LID-BMPs, and each type has its own intrinsic technical and/or economical characteristics and limitations for implementation. The selection of the most appropriate BMP type(s) for a specific installation site is therefore a very important planning step. In the present study, a multi-criteria selection index system (MCIS) for LID-BMP planning was developed. The selection indexes include 12 first-level indices and 26 second-level indices which reflect the specific installation site characteristics pertaining to site suitability, runoff control performance, and economics of implementation. A mechanism for ranking the BMPs was devised. First, each individual second-level index was assigned a numeric value that was based on site characteristics and information on LID-BMPs. The quantified indices were normalized and then integrated to obtain the score for each of the first-level index. The final evaluation scores of each LID-BMP were then calculated based on the scores for the first-level indices. Finally, the appropriate BMP types for a specific installation site were determined according to the rank of the final evaluation scores. In order to facilitate the application of the MCIS BMP ranking system, the computational process has been coded into a software program, BMPSELEC. A case study demonstrating the MCIS methodology, using an LID-BMP implementation planning at a college campus in Foshan, Guangdong Province, is presented.     

Chemical compositions and sources of atmospheric PM10 in heating, non-heating and sand periods at a coal-based city in northeastern China

Mass concentrations and chemical components (18 elements, 9 ions, organic carbon [OC] and elemental carbon [EC]) in atmospheric PM(10) were measured at five sites in Fushun during heating, non-heating and sand periods in 2006-2007. PM(10) mass concentrations varied from 62.0 to 226.3 μg m(-3), with 21% of the total samples' mass concentrations exceeding the Chinese national secondary standard value of 150 μg m(-3), mainly concentrated in heating and sand periods. Crustal elements, trace elements, water-soluble ions, OC and EC represented 20-47%, 2-9%, 13-34%, 15-34% and 13-25% of the particulate matter mass concentrations, respectively. OC and crustal elements exhibited the highest mass percentages, at 27-34% and 30-47% during heating and sand period. Local agricultural residuals burning may contribute to EC and ion concentrations, as shown by ion temporal variation and OC and EC correlation analysis. Heavy metals (Cr, Ni, Zn, Cu and Mn) from coal combustion and industrial processes should be paid attention to in heating and sand periods. The anion/cation ratios exhibited their highest values for the background site with the influence of stationary sources on its upper wind direction during the sand period. Secondary organic carbon were 1.6-21.7, 1.5-23.0, 0.4-17.0, 0.2-33.0 and 0.2-21.1 μg m(-3), accounting for 20-77%, 44-88%, 4-77%, 8-69% and 4-73% of OC for the five sampling sites ZQ, DZ, XH, WH and SK, respectively. From the temporal and spatial variation analysis of major species, coal combustion, agricultural residual burning and industrial emission including dust re-suspended from raw material storage piles were important sources for atmospheric PM(10) in Fushun at heating, non-heating and sand periods, respectively. It was confirmed by principal component analysis that coal combustion, vehicle emission, industrial activities, soil dust, cement and construction dust and biomass burning were the main sources for PM(10) in this coal-based city.     

Effects of coal spoil amendment on heavy metal accumulation and physiological aspects of ryegrass (<Emphasis Type="Italic">Lolium perenne</Emphasis> L.) growing in copper mine tailings

Copper mine tailings pose many threats to the surrounding environment and human health, and thus, their remediation is fundamental. Coal spoil is the waste by-product of coal mining and characterized by low levels of metals, high content of organic matter, and many essential microelements. This study was designed to evaluate the role of coal spoil on heavy uptake and physiological responses of Lolium perenne L. grown in copper mine tailings amended with coal spoil at rates of 0, 0.5, 1, 5, 10, and 20%. The results showed that applying coal spoil to copper mine tailings decreased the diethylenetriaminepentaacetic acid (DTPA)-extractable Cd, Cu, Pb, and Zn contents in tailings and reduced those metal contents in both roots and shoots of the plant. However, application of coal spoil increased the DTPA-extractable Cr concentration in tailings and also increased Cr uptake and accumulation by Lolium perenne L. The statistical analysis of physiological parameters indicated that chlorophyll and carotenoid increased at the lower amendments of coal spoil followed by a decrease compared to their respective controls. Protein content was enhanced at all the coal spoil amendments. When treated with coal spoil, the activities of superoxide dismutases (SOD), peroxidase (POD), and catalase (CAT) responded differently. CAT activity was inhibited, but POD activity was increased with increasing amendment ratio of coal spoil. SOD activity increased up to 1% coal spoil followed by a decrease. Overall, the addition of coal spoil decreased the oxidative stress in Lolium perenne L., reflected by the reduction in malondialdehyde (MDA) contents in the plant. It is concluded that coal spoil has the potential to stabilize most metals studied in copper mine tailings and ameliorate the harmful effects in Lolium perenne L. through changing the physiological attributes of the plant grown in copper mine tailings.     

The quest for environmental justice in China: citizen participation and the rural–urban network against Panguanying’s waste incinerator

Environmental distribution conflicts (EDCs) related to the construction and operation of waste incinerators have become commonplace in China. This article presents a detailed case study of citizen opposition to an incinerator in the village of Panguanying, Hebei Province. Drawing on in-depth fieldwork, we show how this case was notable, because it transcended the local arena to raise bigger questions about environmental justice, particularly in relation to public participation in siting decisions, after villagers exposed fraudulent public consultation in the environmental impact assessment. An informal network between villagers and urban environmental activists formed, enabling the Panguanying case to exert influence far beyond the village locality. This network was critical in creating wider public debate about uneven power and substandard public participation in siting disputes, a central feature in many Chinese EDCs. By transcending local specificities and exposing broader, systemic inadequacies, this case became instrumental in supporting “strong sustainability”.     

垃圾渗滤液中典型内分泌干扰物质(EDCs)细胞毒性分析

垃圾渗滤液的人类健康风险评估日益受到人们重视,也成为研究热点。本文采用一种新型高级氧化技术UV-Fenton处理渗滤液,并用人体乳腺癌细胞(MCF-7)评估处理过程中渗滤液原液以及渗滤液中典型内分泌干扰物质(EDCs)的细胞毒性,对垃圾渗滤液中EDCs的细胞毒性和变化规律进行了研究。结果表明渗滤液中的邻苯二甲酸二丁酯(DBP)、双酚A(BPA)、壬基酚(NP)是产生细胞毒性的主要物质,其毒性大小为DBPBPANP。在同样的氧化降解过程中显示出不同毒性变化规律,通过GC-MS分析,结果显示UV-Fenton过程中产生了大量的中间产物,这也是引起毒性变化的主要原因。实验结果也说明垃圾渗滤液细胞毒性可以通过UV-Fenton过程有效去除。     

De novo formation of dioxins from milled model fly ash

Environmental Science and Pollution Research - Municipal solid waste incineration (MSWI) fly ash has been classified as hazardous waste and needs treatment in an environmentally safe manner....     

Distribution and controls of heavy metals and organic matter in the surface sediments of the Southern Yellow Sea,China

Environmental Science and Pollution Research - Accurate and effective determination of the source of heavy metals is essential for the treatment of marine ecological environments. This article...